Product Name:Electric Hanging Workshop Suspending Single Girder Bridge Crane 5ton
Max. Lifting Height:6m~30m
Rated Lifting Moment:Different
Max. Lifting Load:32t
Control Method:Cabin Control/wire Rope Remote Control
Power Source:3 Phase 380V 50hz
Electric Hanging Workshop Suspending Single Girder Bridge Crane 5ton
Electric Hanging Workshop Suspending Single Girder Bridge Crane 5ton, lifting weight is 0.5~5 tons, span is 3~16 meters, working level is A3~A5 (JC=25%), working environment temperature is -25~40°C and it is electric hoist It is used in conjunction with the ground for handling and handling heavy loads in general workshops and warehouses.
The LX single-beam suspension crane is not suitable for use in fire hazard, explosion hazard media and in places where the relative humidity is greater than 85% or corrosive, nor is it suitable for lifting molten metal and toxic, flammable or explosive materials.
Electric Hanging Workshop Suspending Single Girder Bridge Crane 5ton consists of main beam (bridge), electric hoist, crane running machinery and electrical control device. The operating machinery is in the form of separate drives. The crane is equipped with safety protection devices such as lifting limit and end limit. There are load limiters available.
Three-in-one rotation system, electric appliance non-contact module speed control, and can realize micro-speed and two-speed proximity frequency conversion function, so that the running hoist and jog are particularly stable. With overload alarm, slanting sling, anti-hook topping secondary protection, missing overcurrent protection, etc., the operating platform (handle) uses 12V safe voltage to achieve multi-function protection of the hoist. When the voltage is 380V+5～10%, the electronic control can be used for “2 million” times for a long time.
Parts of overhead crane: