Product Name:Metallurgy Metal Ladle Lift Foundry Casting Overhead Crane
Max. Lifting Height:6m~30m
Rated Lifting Moment:Different
Max. Lifting Load:30ton
After-sales Service Provided:Commissioning And Training,Free Spare Parts
Control Method: Cabin Control/Remote Control
Power Supply:380V 50Hz Or On Request
Metallurgy Metal Ladle Lift Foundry Casting Overhead Crane
Metallurgy Metal Ladle Lift Foundry Casting Overhead Crane is mainly used at the place where the molten metal is lifted.The working class of the complete machine is A7,and thermal—protective coating is added at the bottom of the main girder.The assembling and test of the crane conform to the document No.ZJBT375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the People’S Republic of China.The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document.
1.The power of crane is three—phase AC;rated frequency is 50HZ;rated voltage is 380V;
2.The temperature of working environment is-10~+60℃;
3.The relative humidity is no more than 50% when the temperature is+40℃;
4.If the requirements are more than above-mentioned,it shall carry out the requirements in the purchase contract as the user asks.
Parts of overhead crane: